Firewire Rob Machado 5'5 Go Fish LFT Epoxy Surfboard. 5'5 x 20 3/8 x 2 1/4" (29.3 litres volume). Futures fin set up, comes without fins. A keel fin set up is recommended. Hit us up for a discount on a set of fins with your new surfboard.
Rob States: "This board just makes me want to surf… no matter what the waves are like. It flies in small to weak waves, and if its overhead and pumping it draws unique lines, allowing me to approach waves differently and explore new lines".
At first glance the outline pays homage to the old school fish but on closer inspection you'll notice some subtle changes. I've narrowed up the swallow tip to tip to give the board more maneuverability and the narrower nose gives it a more speedier outline. The rocker is fairly relaxed with a low entry rocker upfront combined with a subtle tail rocker, giving this board quick ‘up and go' and maximizes its top-end speed.
The bottom contours are best described as "BOARD EAT BOARD” and were inspired by a George Greenough design I rode a few years ago. I've refined it over the years and it now features a really flat bottom concave that runs down the center all the way through the tail. The two side panels run down each rail on either side of the center panel, and transition from concave to flat to Vee while maintaining the deep single concave down the middle.
The overall effect of these design parameters, when combined with a keel fin set up, is a highly maneuverable and speedy board with tons of drive and takes the retro fish to a whole new performance level.
(Linear Flex Technology) White Deckskin - LFT incorporates Firewire's SPRINGER HD, a 0.75" (18 mm) wide aerospace composite that runs down the centerline of the board, representing the next generation in our SPRINGER technology. The SPRINGER HD runs the entire length of the board and plays a pivotal role in optimizing flex from nose to tail.